Absolute EngineersField Service / Gas Generator Engineer
- Recruiter :
- Excel Technical Resourcing Solutions Ltd
- Salary :
- £25,000 to £30,000 per year
- Location :
- Aberdeen, Aberdeenshire
- Description :
- Field Service Engineer Gas Generator Engineer. This Field service engineer / Gas Generator Engineer must live north of Edinburgh due to call out times. Due to the continued success and expansion of the company we are currently looking to fill a number of vacancies for Field Service Engineers / Gas Generator Engineers across the UK. Main duties are: * To ensure maximum availability of single to multi-engine sites by means of scheduled and pro active maintenance * To provide 24 hour response,
- Posted on :
- 05/01/2009
Assembly Technician
- Recruiter :
- EPS ProTech Ltd
- Salary :
- £8 per hour (overtime)
- Location :
- Hertfordshire
- Description :
- Assembly Technician Precision soldering and mechanical assembly Building small sub-assemblies and complete units Ability to work to fine tolerances and use small hand-tools is needed Ability to accurately follow assembly instructions and build procedures required Hertfordshire £8.20 per hour + overtime 3 Months +
- Posted on :
- 05/01/2009
Systems Design Engineer
- Recruiter :
- Terry Parris Associates Limited
- Salary :
- £28,000 to £30,000 per year
- Location :
- West Sussex
- Description :
- Systems Design Engineer. Our client requires a systems design engineer to: be responsible for the design and development of components required for Display systems. To be responsible for Display Configurations from bid phase through to final design, with appropriate training. To produce assembly drawings, detailed manufacturing drawings and Bills of Materials in accordance with Company Quality Procedures. ensure principle of quality is embodied in concept and fact of all areas of work. To raise
- Posted on :
- 05/01/2009
Service Engineer
- Recruiter :
- Excel Technical Resourcing Solutions Ltd
- Salary :
- £27,000 to £36,000 per year (+ van)
- Location :
- Kent
- Description :
- Service Engineer: The Person Self-motivated, electrically qualified, electro-mechanical Service Engineer Experience of servicing a wide range of overhead cranes and hoists. ONC in electrical or mechanical engineering. Proven competency to install, inspect, and maintain lifting equipment in accordance with relevant operating/installation instructions and the requirements of the Provision and Use of Work Equipment Regulations 1998 (PUWER). Due to the number of customer site across the UK they
- Posted on :
- 05/01/2009
HGV / GSE Technician
- Recruiter :
- Excel Technical Resourcing Solutions Ltd
- Salary :
- £22,000 to £28,000 per year
- Location :
- Luton, Bedfordshire
- Description :
- GSE / Vehicle mechanic Our client is a worldwide company supporting airport vehicles in a number of locations around the UK and Europe. They are currently looking for a vehicle mechanic to work around Luton airport. This is a permanent position for a mechanic / technician to work on the Ground service equipment (GSE), trucks and airport support vehicles. Ideally you will have a background in HGV, LGV, Plant or GSE vehicles. This is a day shift position and the rates are highly competitive. I
- Posted on :
- 05/01/2009
Control Systems Engineer
- Recruiter :
- Action Technical Services Ltd
- Salary :
- Neg DOE
- Location :
- Cambridgeshire
- Description :
- Control Systems Engineer - You will play a central role in ensuring projects are designed to exacting standards and are delivered on time, within budget. In this team environment you will be innovative in your approach and able to work confidently through the development life cycle (design, build, test and deliver) to ensure high levels of customer satisfaction. You will probably have a degree, HNC or approved apprenticeship; knowledge of Siemens and or Mitsubishi PLCs & HMI; knowledge of Siemen
- Posted on :
- 05/01/2009
Project Leader
- Recruiter :
- Action Technical Services Ltd
- Salary :
- NEG DOE
- Location :
- Cambridgeshire
- Description :
- Project Leader - to manage individual projects using the resources of an experienced team of engineers and developers; ensuring that all projects are built on time, within budget and to the required quality. You will understand the technical aspects of the project, how they inter-relate and lead the team in planning solutions and avoiding pitfalls. You will have: an appropriate degree, HNC or an approved apprenticeship; a minimum 2 years experience, developing custom automation or special purpos
- Posted on :
- 05/01/2009
PSV Engineer / Technician
- Recruiter :
- Excel Technical Resourcing Solutions Ltd
- Salary :
- £26,000 to £30,000 per year (+ great benefits)
- Location :
- London South, West and South East
- Description :
- PSV Engineers / Technicians Our client are one of the biggest Bus and Coach companies in London and are recruiting for PSV technicians across London, Surrey and Berkshire. Due to new contract there areopportunities available in West, South west, South, South East, East London down to Croydon, Surrey and Berkshire. Job Description for PSV Techncian: - Maintaining the fleet of vehicles is the responsibility of the Skilled Engineers / PSV technicians. - You will be responsible for all the main
- Posted on :
- 05/01/2009
LGV Technicans
- Recruiter :
- Excel Technical Resourcing Solutions Ltd
- Salary :
- £25 to £30 per year (plus OT)
- Location :
- Berkshire
- Description :
- LGV Technicians: Reading, Slough Our client are currently looking for an additional qualified LGV Technician to complement this busy and committed team at our in-house fleet vehicle workshop in Reading and Slough. Their fleet consists of two main multi-axle rigid chassis types, mounted with specialist container handling and mobile compaction systems. You will need to have either C&G 380, NVQ Level 3 or at least 10 years experience An LGV licence would be a distinct advantage for vehicle diagno
- Posted on :
- 05/01/2009
CAD Design Engineer
- Recruiter :
- Action Technical Services Ltd
- Salary :
- c£28K DOE
- Location :
- Northamptonshire
- Description :
- CAD Design Engineer - A hands on design office role using AutoCAD and Inventor 3D package, which is an essential requirement. You'll need an in-depth knowledge of heavy fabrication and welding processes, mechanical handling equipment for process plant such as screw conveyors, pressure vessels, pipework and plant layouts. Experience of design calculations, P&ID & Process Flow schemes is not essential but would be advantageous too. Applicants should have at least an HNC in Mechanical Engineering.
- Posted on :
- 05/01/2009
Senior Vehicle Engineer / Bus Technician
- Recruiter :
- Excel Technical Resourcing Solutions Ltd
- Salary :
- £28,000 per year (28K basic)
- Location :
- South-West, London
- Description :
- SENIOR VEHICLE ENGINEER / BUS TECHNICIAN, ENGINEER Our Client are a major London Bus Company and are currently looking for a at their Stockwell Garage. You should have a sound knowledge of all aspects of vehicle maintenance including mechanical, electrical and bodywork. A relevant apprenticeship or similar qualification is essential and you must have experience working on HGV or PCV vehicles. Applicants are required to hold a PCV licence. If the applicant does not hold a PCV licence training w
- Posted on :
- 05/01/2009
Calibration Engineer
- Recruiter :
- Intec Recruitment Services Limited
- Salary :
- £28,000 to £30,000 per year
- Location :
- Reading, Berkshire
- Description :
- Calibration Engineer Our client are looking for a Calibration Engineer with a strong technical discipline in the field of calibration and repair of electronic test equipment. This position is responsible for testing, calibrating and repairing a wide range of electronic instrumentation. You will need good people skills and be able to explain detailed technical information to calibration engineers and their customers. You must be capable of work to established calibration methods, procedures,
- Posted on :
- 05/01/2009
Assembly Technician
- Recruiter :
- Intec Recruitment Services Limited
- Salary :
- £18,000 to £20,000 per year
- Location :
- Reading, Berkshire
- Description :
- Assembly Technician Our client manufactures a wide range of transducers and their product range includes sensors to measure load and pressure. They are currently looking to recruit an Assembly Technician with previous experience of fine mechanical assembly along with the ability to solder to high level and some testing experience.
- Posted on :
- 05/01/2009
Senior Quality Engineer
- Recruiter :
- Intec Recruitment Services Limited
- Salary :
- £28,000 to £32,000 per year
- Location :
- Hayes, Middlesex
- Description :
- Senior Quality Engineer Our client is a multi-disciplined electronic design and manufacturing company who predominantly produce a range of rugged military applications. They are currently looking to recruit a Senior Quality Engineer or Manager with previous experience of working within the electronics manufacturing industry to implement and update their ISO9001 / 2000 accreditation.
- Posted on :
- 05/01/2009
Grinder
- Recruiter :
- Intec Recruitment Services Limited
- Salary :
- £22,500 to £28,125 per year
- Location :
- Farnborough, Hampshire
- Description :
- Grinder Main Duties Setting & Operating of both Manual and CNC internal and external grinding machines. To produce ground assemblies within standard times to the correct Company and Customer quality requirements. Qualifications Mechanical engineering skills gained by apprenticeship or through experience in a similar manufacturing industry. Experience It is essential to have knowledge of Machining Practices within an environment, which produces components with fine tolerances and high surface
- Posted on :
- 05/01/2009
ATe Operator
- Recruiter :
- Intec Recruitment Services Limited
- Salary :
- £15,000 to £15,500 per year
- Location :
- Farnborough, Hampshire
- Description :
- ATE Operator Purpose The purpose of this role is the testing of speed products using Automatic Testing Equipment. Key responsibilities Manual testing Electronic Testing Fault finding Inputting data onto specialised system Running of Standards Skills and Experience Essential IT literate Previous experience of working in a production environment Flexibility in hours Desirable Previous experience of testing
- Posted on :
- 05/01/2009
Development Engineer
- Recruiter :
- Terry Parris Associates Limited
- Salary :
- £26,000 to £28,000 per year
- Location :
- West Sussex
- Description :
- Development Engineer. Our client requires a Development Engineer to work within the New Products Development team to provide technical and project management skills enabling new products to be developed that meet the required specification including cost, are within the agreed timescale and project costs. Responsibilities include: To work together with Project Sponsors and Product Managers, to help define the project, the deliverables and success criteria. To develop - from concept to implemen
- Posted on :
- 05/01/2009
Paint sprayer Automotive, car , Truck
- Recruiter :
- Excel Technical Resourcing Solutions Ltd
- Salary :
- £9 to £11 per hour
- Location :
- Buckingham, Buckinghamshire
- Description :
- Paint Sprayer, Automotive, car, truck Our client is a large HGV dealership based in Buckingham. They are looking to take on a paint sprayer to work in the body shop. This is a full time position working Monday to Friday 08:00 until 18:00, Saturday 07:00 until 12:00. You will need to have experience of automotive paint spraying from a car or truck background. Experience of metallic and water based paints. Experience of removing, preparing, spraying, finishing and fitting of body panels. This i
- Posted on :
- 05/01/2009
Fabricator / Welder
- Recruiter :
- Intec Recruitment Services Limited
- Salary :
- £13 per hour
- Location :
- Reading, Berkshire
- Description :
- Fabricator / Welder Our client based on the outskirts of Reading is looking to recruit a Fabricator / Welder with MIG experience on a long term contract. My client are specialists at Manufacturing industrial vehicles so previous experience of fabrication is essential.
- Posted on :
- 05/01/2009
CNC Miller
- Recruiter :
- Intec Recruitment Services Limited
- Salary :
- £17 per hour
- Location :
- Reading, Berkshire
- Description :
- Our client based in the Reading area is looking to recruit an experienced CNC Miller with previous experience of setting a Bridgeport machine with Heidenhein controls. This is a long term rolling contract with an immediate start.
- Posted on :
- 05/01/2009